If you have a fire or water emergency, please call us now at (214) 343-3973

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

How To Stop a Commercial Toilet From Flushing Repeatedly: 3 Steps

4/18/2019 (Permalink)

Knowing how to maintain the unit can lower the risk of floods and the damage they cause.

Actions To Take When Commercial Toilet Flushes Repeatedly

If you own a Lochwood, TX, business, then your building likely contains one or more restrooms for employee and customer use. Maintaining commercial toilets are usually simple, as they run on a device called a flushometer that helps the units flush effectively. However, when these devices malfunction, it may cause a toilet overflow and flood damage. If you are dealing with such a problem, there are a few actions you can take to resolve it.

1. Open the Flushometer

Once you turn off the water supply to the toilet, you will have to open the flushometer to expose its inner workings. Use a wrench to undo the outer lid. Once this is loose enough, you can lift it off to expose the flushometer’s flange cover. Take a moment to ensure the water is completely shut off, or you may be dealing with an additional toilet overflow otherwise.

2. Clean the Gasket and Weep Hole

Once common cause of a commercial toilet flood is sediment buildup around the unit’s flange, which may also be blocking the weep hole. This hole allows water to drain out of the flange; however, when it stops working correctly, the flange can no longer form a tight seal. Once this occurs, it can be difficult to stop a toilet from flushing itself repeatedly. You may be able to resolve the problem by thoroughly cleaning away sediment and other buildup and ensuring the weep hole’s port is not blocked.

3. Reassemble the Unit

Once you have cleaned all the parts of the flange, replace it and screw the cover back on. Test the toilet with a flush and watch to see if it fills and shuts off. If it does not operate properly and you are concerned the unit will overflow again, call in a flood control and restoration service to inspect the lines and the toilet itself, which may prevent any moisture damage to your restroom’s floor.

A toilet that flushes repeatedly can cause increased water bill costs and toilet overflow problems at your Lochwood, TX, business. Knowing how to maintain the unit can lower the risk of floods and the damage they cause.

Other News

View Recent Posts